You can download the specification sheets with all the technical information here.
The Mitsubishi Ecodan is an air source heat pump that provides heating and hot water for homes and buildings. It works by extracting heat from the outside air and using it to heat the interior. The heat pump system is highly efficient and can provide over four times the energy it consumes, making it an eco-friendly alternative to traditional heating systems. The Ecodan can also be integrated with a solar photovoltaic system to further reduce energy consumption and costs. The system is easy to install and requires minimal maintenance, making it a convenient and cost-effective solution for homeowners looking to reduce their carbon footprint.
Air source heat pumps like the Mitsubishi Ecodan can work effectively in English weather. However, the performance of the heat pump may be affected by extremely low temperatures. In general, air source heat pumps are most efficient when the outdoor temperature is above freezing, and their efficiency decreases as the temperature drops, although the Ecodan is an exception to rule, as it maintains its efficiency level right down to -7 degrees. To maintain good performance in cold weather, it’s important to properly size the system and properly insulate the building. Some heat pumps may also have supplementary heating elements to provide additional warmth when needed. It’s always best to consult your local heating and cooling professional to determine if an air source heat pump is a good fit for your specific climate and heating needs.
The Mitsubishi Ecodan air source heat pump comes in a range of sizes to meet the heating and hot water needs of different buildings and homes. The size of the heat pump is determined by its heating capacity, which is measured in kilowatts (kW). The specific sizes offered by Mitsubishi may vary, but common options include:
- 5kW
- 6kW
- 8.5kW
- 11.2kW
- 14kW
The right size for your home will depend on factors such as the size of your home, insulation levels, number of occupants, and your heating and hot water needs. A technical survey is normally required before installation to help you determine the appropriate size heat pump for your specific requirements.
The Coefficient of Performance (COP) of a Mitsubishi Ecodan air source heat pump is a measure of its energy efficiency. It represents the ratio of energy output (heat) to energy input (electrical power). A higher COP means that the heat pump is producing more heat per unit of electrical energy consumed.
What Is The COP of a Mitsubishi Ecodan?
The actual COP of a Mitsubishi Ecodan heat pump will depend on several factors, including outdoor temperature, insulation levels, and system configuration. According to Mitsubishi, the COP of the Ecodan heat pump can range from 3.5 to 4.5 in average conditions. This means that for every 1 kilowatt (kW) of electrical energy consumed, the heat pump can produce 3.5 to 4.5 kW of heat.
It’s important to note that the COP of an air source heat pump will vary depending on the specific conditions and use, so the actual COP of a specific system may be different from the average. A heating and cooling professional can provide more accurate and specific information on the COP of a particular heat pump based on the specific installation and operating conditions.
Do You Get A Warranty With The Mitsubishi Ecodan Heat Pump?
The Mitsubishi Ecodan air source heat pump typically comes with a warranty. The exact terms of the warranty, including its duration and coverage, will depend on the specific model and the purchasing agreement.
It is common for air source heat pumps to come with a manufacturer’s warranty that covers the system components and workmanship for a set period of time, typically between 5 and 7 years. Some manufacturers may also offer extended warranties that provide coverage for a longer period.
It’s important to review the warranty terms carefully and to understand what is and is not covered, as well as any conditions or limitations that apply. If you have any questions or concerns, it is best to consult the manufacturer or your heating and cooling professional.
Will I Need A New Water Cylinder And New Radiators WIth A Heat Pump?
Whether or not you will need a new water cylinder and radiators with a Mitsubishi Ecodan air source heat pump depends on several factors, including your existing heating system and the requirements of the heat pump.
In some cases, you may be able to use your existing water cylinder and radiators with the heat pump. However, if your existing heating system is not compatible with the heat pump, you may need to upgrade to a more appropriate system. This will depend on the specific requirements of the heat pump and the compatibility of your existing system.
The local installer that you choose who is experienced with air source heat pumps will be able to determine if you will need new water cylinder and radiators and what is required for a successful installation. They can assess your specific heating needs and requirements, and make recommendations for any upgrades or changes that may be necessary.
How Much Does A Mitsubishi Ecodan Cost To Install?
The cost of a Mitsubishi Ecodan air source heat pump will depend on several factors, including the size of the system, the specific model, and the installation and operating costs.
As a rough estimate, the cost of a Mitsubishi Ecodan air source heat pump can range from around £10,000 to £15,000 or more, depending on the size of the system and the specific requirements of the installation, the lower end would be a small heat pump and no radiators, to the larger side being a bigger heat pump with all new radiators. The cost of installation will also vary, depending on the complexity of the installation, the materials and labour required, and the location of the installation.
It’s important to keep in mind that while the upfront cost of an air source heat pump may be higher than other heating systems, it can be offset by the energy savings and reduced operating costs over time. An experienced heating and cooling professional can provide a more accurate estimate of the cost of a Mitsubishi Ecodan air source heat pump, including the cost of installation, based on your specific heating needs and requirements.
Are There Any Grants Towards The Cost Of A Heat Pump?
Air source heat pumps, including the Mitsubishi Ecodan, can be eligible for the UK government’s Boiler Upgrade Scheme (BUS), which replaced the Renewable Heat Incentive (RHI) program from April 2022.
The Boiler Upgrade Scheme provides funding to support home energy efficiency improvements, including the installation of low-carbon heating systems such as air source heat pumps. To be eligible for the grant, the heating system must meet certain requirements, such as a minimum efficiency rating noise and emissions standards, which is a test that Mitsubishi’s Ecodan Heat Pump passes with flying colours.
You see our article here announcing the ‘Boiler Upgrade Scheme‘ grant increasing from £5000 to £7500. – £7500 Air Source Heat Pump Voucher Update
Does The Mitsubishi Ecodan Have A Mobile App?
The Mitsubishi Ecodan air source heat pump can work with the Melcloud mobile app. Melcloud is a cloud-based platform developed by Mitsubishi Electric that allows you to control and monitor your heating and cooling system remotely using a smartphone, tablet, or computer.
The Melcloud app provides real-time access to your heating and cooling system, so you can adjust the temperature and settings from anywhere, at any time. You can also set schedules, view energy usage data, and receive alerts and notifications if there is a problem with your system.
To use the Melcloud app with your Mitsubishi Ecodan air source heat pump, you will need to have a compatible control system installed and set up, then you will need to create an account on the Melcloud platform. Once your account is set up, you can connect your heating and cooling system to the app and start using it to manage your system remotely.
You also must have home wifi system with a signal that reaches to the control box.
Do I Need An Installer That is A Business Solutions Partner of Mitsubishi?
A Business Solutions Partner (BSP) with Mitsubishi is a company or organization that has been authorized by Mitsubishi Electric to offer their products and services to customers in a specific region or market.
BSPs are typically experienced and knowledgeable in the products and services offered by Mitsubishi Electric, and they work closely with the manufacturer to provide customers with high-quality products, support, and services. BSPs also have access to training and resources from Mitsubishi Electric to help them stay up-to-date on the latest products and technologies, and to ensure that they are able to provide the best possible solutions and support to their customers.
Working with a BSP can provide customers with several benefits, including access to a wider range of products and services, experienced and knowledgeable support, and a direct connection to the manufacturer. It can also provide customers with peace of mind, knowing that they are working with an authorized and experienced company that is backed by Mitsubishi Electric.
If you are interested in working with a Business Solutions Partner with Mitsubishi, you can visit the Mitsubishi Electric website or contact the manufacturer directly to find a BSP in your area.